THERMOFIRE project in progress… ...

Last month, CANOE received the consortium of the European THERMOFIRE project at its premises in Lacq (France).   Excellent moment of exchanges and sharing on the progress of this project ...
15 décembre 2023

Back to the progress of the European OVERLEAF project ...

This week, the OVERLEAF consortium met in Spain at the AIMPLAS site for two days of discussions on the progress of the project. The OVERLEAF project, funded by the European ...
14 décembre 2023

Back on the first EMPHASIS project meeting ...

We were very happy to welcome the EMPHASIS project team for two days.   EMPHASIS, a European research project launched in February 2023 and funded by Horizon Europe, aims to set ...
20 octobre 2023

The Greenvehicles LEVIS consortium in Turkey ...

On September 27th and 28th, the Greenvehicles LEVIS consortium met in Turkey. All the partners discussed in detail the progress of the project and the areas for future development.   ...
3 octobre 2023

End of the NEMMO project: the Next Evolution in Materials and Models for... ...

Last Wednesday and Thursday, the NEMMO European project consortium met at the SSPA premises in Denmark to bring 4 years of research and development to a close.   The aim ...
22 septembre 2023

CANOE PARTNER OF THE EUROPEAN LEVIS PROJECT: project on the lightening of electric... ...

On February 2, 2021 the first phase of the LEVIS project, a three-year EU (Horizon 2020) funded innovation project, started with a kick-off meeting via video conference. The aim of ...
14 avril 2021

Installation and start-up of the wet spinning pilot line at our Lacq site ...

In collaboration with IRT Jules Verne and within the framework of the FORCE project, CANOE has just installed a wet spinning line which will make possible to control the formulation ...
9 octobre 2020

CANOE partner of the NEMMO project is proud to announce the launch of... ...

The NEMMO project has installed a set of tidal turbine blade panels made from fibreglass and a gel-coat coating for testing at the HarshLab facility. The samples, taken from the current Magallanes’ ...
24 février 2020

CANOE and GRL- ARKEMA has received two ELIUM® wind blades ...

At the end of March, two wind blades of 25meters each have arrived at CANOE technological center in LACQ. They have been manufactured in Elium® resin during the EFFIWIND project ...
18 avril 2018

OUTREACH WORKSHOP ORGANIZED by DISTRUC PhD students in EDINBURGH ...

The PhD students of the two ITNs DISTRUC and COLLDENSE participated at the Edinburgh International Science Festival from April 6-8, 2018. In collaboration between the two networks, the students organized ...
13 avril 2018

EFFIWIND project: First 25m long wind blade manufactured using ELIUM resin ...

CANOE is proud to be part of EFFIWIND project which has been highlighted in ARKEMA video showing the 25m long, G2 wind blade manufacturing. EFFIWIND project, funded by ADEME, started ...
27 mars 2018

CANOE, the COMPOSITE “PROJECT FACTORY” ...

The French journal LesEchos has just published a focus article on our Technology Center, our collaborations and innovations.
16 février 2018

FOCUS ON BALAKOVO Carbon Production LTD – OUR PARTNER IN CARBOPREC Project ...

CANOE is proud of the focus article on BALAKOVO Carbon Production LTD, our partner in CARBOPREC European project. In its issue 2 published  on June 26th 2017, the Russian magazine ...

CANOE attended the kick-off meeting of SMARTFAN project – 01/16/2018 ...

CANOE attended the kick-off meeting of the European project SMARTFAN held on 2018/01/16 in the European Commission premises in Brussels (BE). This research and innovation action (RIA) gathers 18 partners. ...
24 janvier 2018

CARBOPREC final meeting hosted by CANOE – December 14th-15th 2017 ...

On December 14th and 15th, CANOE hosted the CARBOPREC consortium for the final meeting. After 4 years of R&D, it was the opportunity to show all the technologies developed during ...
19 décembre 2017

FIBRALSPEC – CARBOPREC – 11.29.2017 ...

The european project FIBRALSPEC (same call as CARBOPREC with CANOE as partner) organized on November 29th a workshop as final event. CANOE had the opportunity to present the last results ...

CANOE hosted the Steering Committee of AUTONOTEX Project ...

The AUTONOTEX project was launched two years ago and aims in particular at the development of three-component fibers combining electrical and piezoelectric conductive polymers. The piezoelectric polymer is a Polyvinylidene ...
17 novembre 2017

Steering Committee Meeting of ISOCEL project – October 11th and 12th 2017 in... ...

During the ISOCEL steering committee at T0 + 66 months, which took place in MONDRAGON ASSEMBLY facilities (located in Orange, France) on October 11th and 12th 2017, MONDRAGON unveiled the ...
13 octobre 2017

3D printing: CANOE held the award ceremony of the PRINTCR3DIT European contest ...

On Tuesday, October 10th, a Czech junior engineer – Jan Klusak – received in CANOE premises in Pau (France) the first prize of the PRINTCR3DIT contest for his catalytic reactor ...
11 octobre 2017

FORCE PROJECT: develop an economical carbon fiber sector – CANOE partner of this... ...

The FORCE II project (“realistic optimized fiber based on economical carbon”) The European regulations force the French automotive companies to find solutions to comply with the CO2 reduction down to ...
28 mars 2017

CANOE presented the REVERPLAST project in CRECOF Workshop – ACHIEVE SUCCESSFUL RECYCLING OF... ...

Towards a better repurposal of composite materials. On last February 2nd, CRECOF (“French committee of composites recycling”) organized a workshop in Technocampus Composites, next to Nantes (France), in order to ...
9 février 2017

CANOE – DISTRUC PROJECT: OUR PH.D. STUDENT HONOURED WITH “BEST OUTREACH ACTIVITY 2016”... ...

Marie Föllmer, Ph.D. student in CANOE in DISTRUC project, won the “Best Outreach Activity 2016” prize awarded by COST Action MP1305 thanks to her major input in the outreach event ...
27 janvier 2017

CANOE in direct live from « Assises Européenne de la Transition Energétique »... ...

CANOE is presenting a new generation of acrylic, recyclable, photovoltaic panels developed in ISOCEL project.
24 janvier 2017

CANOE: M2i, a TAUPIN’UP project partner, winner of the EBAE award ...

CANOE is proud to collaborate with M2i Life Sciences which has just been awarded by Europe board for its work and its innovative products in the field of pheromones and ...
16 novembre 2016

Effiwind: a new generation of wind blades ...

In issue 108 (October 2016) dedicated to wind energy, JEC COMPOSITES MAGAZINE wrote a focus article about EFFIWIND project. The goal of this project is to develop a new generation ...
3 novembre 2016

Effiwind – a new generation of wind blades ...

The goal of EFFIWIND project is to develop a new generation of wind blades based on thermoplastic, acrylic, and recyclable polymeric materials. This project, supported by ADEME and Nouvelle Aquitaine ...
19 juillet 2016

CANOE signs up for Autonotex project about connected textiles ...

The goal of AUTONOTEX project is to standardize and launch the first autonomous connected textile, designed for medical sheets – that could monitor patient health – and professional underwear for ...
12 avril 2016

First newsletter of the european project DiStruc ...

The European project DiStruc (“Directed Structure at the meso-scale”) is a Marie Curie Innovative Training Network providing integrated training for 15 young researchers in the field of soft condensed matter. ...
6 avril 2016

2nd meeting for partners of European project PRINTCR3DIT in Oslo ...

As part of H2020 project PRINTCR3DIT about custom manufacturing of catalytic reactors using 3D printing, CANOE has been warmly welcomed by its Norwegian partner SINTEF for the 6-months progress meeting. ...
21 mars 2016