3rd Dresden International Colloquium on Tailored Carbon Fibers ...

From March 20 to 22 in Dresden, international CF specialists gathered to share and discuss the latest advances in custom carbon fiber development.    Among them, Xavier SOLIMANDO, from our ...
26 mars 2024

1st Workshop EMPHASIS Project ...

đź‘Ź Join Us for the 1st Open Workshop on Novel Materials for Supercapacitors - A Key EMPHASIS Project Initiative under HEU-HORIZON 🌟   As part of the European project EMPHASIS ...
11 mars 2024

CANOE at JEC World 2024 ...

JEC World is the world's No. 1 trade show dedicated to composite materials and their applications, welcoming the main players in the market to develop their business and network, as ...
14 février 2024

Setting course for 2024! ...

As we welcome a new year full of promise, we are grateful for the valuable collaboration we share with you.    May 2024 be a year of innovation, success and ...
2 janvier 2024

Happy Holidays ! ...

As the year draws to a close, we would like to express our gratitude for the fruitful collaboration we have shared. Your trust inspires us every day.    May this ...
22 décembre 2023

[ANNOUNCEMENT] – RICHARD AUDRY, NEW PRESIDENT OF THE CANOE TECHNOLOGY CENTER ...

The Management Board of CANOE elected Richard Audry as President on 28 July 2021. He succeeds Patrice Gaillard who had held this position since July 2020.   A chemist by ...
29 septembre 2021

Installation and start-up of the wet spinning pilot line at our Lacq site ...

In collaboration with IRT Jules Verne and within the framework of the FORCE project, CANOE has just installed a wet spinning line which will make possible to control the formulation ...
9 octobre 2020

July 1, 2020: CANOE becomes autonomous ...

CANOE is a Technological Centre dedicated to innovative materials, at the service of industrialists, which has continuously developed and increased its performance at both national and European level over the last ...
21 juillet 2020

REOPENING OF ALL OUR SITES SINCE 18 MAY 2020 ...

18 mai 2020

A WET-SPINNING LINE will be installed soon at CANOE Lacq ...

CANOE is very involved in the manufacturing of fibers, especially from bio-based materials such as cellulose or lignin. These fibers can be used as precursors for low cost carbon fibers, ...
15 mai 2020

COVID 19 – MEASURES ADOPTED BY CANOE ...

Following the measures put in place to limit the spread of the COVID-19 epidemic, CANOE continues its activity under the following conditions: - All team members have been teleworking since ...
17 mars 2020

CANOE – NEW PHONE NUMBER – +33 (0)5 35 38 97 27 ...

Our telephone number has changed, please dial +33 (0)5 35 38 97 27, thank you for your understanding.
12 mars 2020

RECYCLING Elium® GLASS FIBERS IN PMMA THERMOPLASTICS ...

During the past years, recycling of thermoplastics has attracted the interest of the plastics industry. The recyclability is one of the advantages of these raw materials. On the other hand, ...
24 janvier 2020

JEC 2019 : COME TO MEET OUR EXPERTS ...

20 février 2019

CANOE ANNOUNCES THE OPERATION OF CARBONIZATION PILOT ON ITS LACQ SITE / FORCE... ...

As part of the FORCE project, which aims to develop low cost carbon fibers with mechanical properties tailored for the automotive, and sports and leisure markets ; the regional council ...
25 septembre 2018

CANOE is involved in the future Nautical and Naval Cluster New-Aquitaine ...

On June 11, 2018, CANOE shared a friendly time initiated by the Regional Council of New-Aquitaine, with the nautical and naval sector on board of the Hermione frigate. On this ...
25 juin 2018

CANOE: NEXT ORALS ON CARBON FIBERS ...

In the coming weeks, CANOE will participate to several international conferences to present its results on biobased precursors such as lignin or cellulose for carbon fibers :   1. ChemOnTubes – ...
23 avril 2018

OUTREACH WORKSHOP ORGANIZED by DISTRUC PhD students in EDINBURGH ...

The PhD students of the two ITNs DISTRUC and COLLDENSE participated at the Edinburgh International Science Festival from April 6-8, 2018. In collaboration between the two networks, the students organized ...
13 avril 2018

JEC 2018 : COME TO MEET OUR EXPERTS ...

23 février 2018

a CARBONIZATION LINE will be installed soon at CANOE Lacq ...

CANOE is very involved in the manufacturing of low cost carbon fibers from precursors such as cellulose, lignin or polyethylene. The objective is to develop economical carbon fibers for use ...
20 février 2018

CANOE BERSOL: TRAINING CLASS ABOUT COMPOSITES MANUFACTURING PROCESSES FOR ENSCBP ENGINEERING SCHOOL STUDENTS... ...

On Wednesday, January 24th, CANOE received final year students of ENSCBP engineering school (Materials and Advanced Processes majors) for a one-day training class about composite materials. On this occasion, they ...
1 février 2018

CANOE – 11-09-2017 – OFFICIAL OPENING OF OUR NEW FACILITIES LOCATED IN LACQ... ...

  CANOE is proud to announce the official opening of its new facilities located in Lacq (France). This ceremony will occur tomorrow on November 9th 2017 and will be attended ...
9 novembre 2017

CANOE – COMPOSITES MEETINGS / NANTES (FRANCE) – 2017 – BOOTH #112 ...

This year, CANOE will attend once again the COMPOSITES MEETINGS event in Nantes (France) on November 8th and 9th 2017. We will be pleased to meet you in our booth ...
8 novembre 2017

3D printing: CANOE held the award ceremony of the PRINTCR3DIT European contest ...

On Tuesday, October 10th, a Czech junior engineer – Jan Klusak – received in CANOE premises in Pau (France) the first prize of the PRINTCR3DIT contest for his catalytic reactor ...
11 octobre 2017

10-18-2017 – FIRE & MARINE TECH WORKSHOP – CREPIM & CANOE ...

On Wednesday, October 18th 2017 from 9 a.m. to 5 p.m., CREPIM and CANOE will organize a new technical workshop: FIRE & MARINE FTP CODE 2010: WAYS AND MEANS TO ...
5 octobre 2017

CANOE ATTENDED THE CHRISTENING CEREMONY OF ARKEMA 3 ...

On Friday, September 29th 2017, CANOE was proud to be among the guests for the christening ceremony of the prototype Mini 6.50 ARKEMA 3. A couple of days before the ...
2 octobre 2017

CANOE PAU – 09-28-2017 – ADDITIVE MANUFACTURING WORKSHOP ...

  The Nouvelle Aquitaine and Pau-BĂ©arn CCI, CANOE, CETIM, and the Nouvelle Aquitaine board joined forces to give you a half day discovery workshop dedicated to the additive manufacturing various ...
18 septembre 2017

PROTOTYPE GAZELLE V1: CANOE and GAZELLE TECH partners again ...

Today, on Thursday 06.29.2017, Gazelle Tech and CANOE announced, during the ECO TECH'DAY workshop organized by Bordeaux Technowest, their partnership in developing the new prototype Gazelle V1. In light of ...
29 juin 2017

6th Elastomers Work Group Meeting organized in CANOE ...

On June 21st 2017, CANOE hosted in its Cheminnov facilities (Pessac, France) the 6th Elastomers Work Group Meeting in collaboration with “Aquitaine Chimie Durable” (Sustainable Chemistry in Aquitaine). The work ...
21 juin 2017

CANOE HIGHLIGHTED ON THE REGION BOOTH – BORDEAUX INTERNATIONAL FAIR (FRANCE) – 2017 ...

A selection of our creations - some of them were the result of collaborative work with our partner D33D - were nicely highlighted on the Nouvelle Aquitaine region booth.
30 mai 2017

CANOE/D33D PARTNERSHIP: optimizing the material/process pair ...

Thanks to its Additive Manufacturing/3D Printing activites, CANOE has an expertise in formulating materials for various additive manufacturing techniques. In mid-2014, CANOE asked the start-up D33D (contact@d33d.fr) – which has ...
12 mai 2017

CANOE at MICM 2017 – 4th edition / Bordeaux (France) – May 10th-11th... ...

This year again, CANOE is attending the 2017 MICM (innovative materials and materials chemistry) conference on May 10th-11th in Bordeaux (France). You can find us during our oral presentations: From ...
10 mai 2017

CANOE & CREPIM – 04.20.2017 – PLASTIC & FIRE TECHNICAL WORKSHOP – PAU... ...

Please don’t forget to register for the new PLASTIC & FIRE technical workshop entitled “plastic fire protection: new features and last developments”. We will organize this event in collaboration with ...
6 avril 2017

CANOE participant in the AXIS workshop – Industry of the Future – 03-22-2017... ...

CANOE is attending today the AXIS workshop organized by ELASTOPÔLE in Schneider Electric facilities (France). We will give an oral presentation about Additive Manufacturing based on photopolymerizable resins.
22 mars 2017

CANOE attending JEC World 2017 – Paris (France) on March 14th-16th 2017 ...

On next March 14th-16th, the JEC 2017 conference (“European Composites Workshop”), the biggest international gathering involving professionals in the field of composites, will take place in Paris (France). CANOE will ...
23 février 2017

CANOE in direct live from « Assises Européenne de la Transition Energétique »... ...

CANOE is presenting a new generation of acrylic, recyclable, photovoltaic panels developed in ISOCEL project.
24 janvier 2017

CANOE WISHES YOU A HAPPY NEW YEAR 2017 ...

19 janvier 2017

Foundation stone laying of CANOE new facilities ...

On Thursday, December 1st 2016 was held the Foundation stone laying ceremony of the extension of Chemstart’up building. This extension will be CANOE new facilities. This 1092 m² building, dedicated ...
5 décembre 2016

CANOE is attending Seanergy on June 1st and 2nd 2016 ...

CANOE is attending the SEANERGY international workshop (sustainable ocean energies) in Aquitaine-Limousin-Poitou-Charentes region facilities on June 1st and 2nd to highlight its skills in the field of composites and advanced ...
2 juin 2016

CANOE is attending MICM ...

CANOE is attending the 3rd edition of Chemistry and Materials workshop (MICM) on May 18th and 19th 2016 in Cité Mondiale in Bordeaux (France). The event consists in scheduled business ...
18 mai 2016

CANOE partner in REVERPLAST project ...

On April 27th 2016, the first French chemist Arkema signed with Ségolène ROYAL (French Secretary of State for environment, energy and sea), Emmanuel MACRON (French Secretary of State for economy, ...
17 mai 2016

CANOE attended Techno Day event in Pau (France) ...

During the Techno Day workshop, organized by Aerospace Valley, innovative products have been presented by specialized companies. The second edition of this workshop which took place on March 31st 2016 ...
4 avril 2016

CANOE attended the 6th Printed Electronics Meetings (France) ...

With a 2 milliards USD market in 2015 (estimated by IDTECHEX), printed electronics is exponentially growing. Electronic connections between components can be printed as well as passive or active components ...
30 mars 2016

2nd meeting for partners of European project PRINTCR3DIT in Oslo ...

As part of H2020 project PRINTCR3DIT about custom manufacturing of catalytic reactors using 3D printing, CANOE has been warmly welcomed by its Norwegian partner SINTEF for the 6-months progress meeting. ...
21 mars 2016