The European LEVIS project has just ended with promising results. Funded by the European Union and involving 13 partners in 7 countries, this project aimed to develop lightweight components for ...

On July 2, we had the honor of seeing our PhD engineer, Quentin Drouhet, represent CANOE at the European Conference on Composite Materials (ECCM21). This conference was an opportunity to ...

From March 20 to 22 in Dresden, international CF specialists gathered to share and discuss the latest advances in custom carbon fiber development.    Among them, Xavier SOLIMANDO, from our ...

👏 Join Us for the 1st Open Workshop on Novel Materials for Supercapacitors - A Key EMPHASIS Project Initiative under HEU-HORIZON 🌟   As part of the European project EMPHASIS ...

The launch meeting for the ECOHYDRO project was held last week at IMT Nord Europe.    Funded under the HORIZON EUROPE Framework Program for Research and Innovation, this international project ...

JEC World is the world's No. 1 trade show dedicated to composite materials and their applications, welcoming the main players in the market to develop their business and network, as ...

As we welcome a new year full of promise, we are grateful for the valuable collaboration we share with you.    May 2024 be a year of innovation, success and ...

As the year draws to a close, we would like to express our gratitude for the fruitful collaboration we have shared. Your trust inspires us every day.    May this ...

Last month, CANOE received the consortium of the European THERMOFIRE project at its premises in Lacq (France).   Excellent moment of exchanges and sharing on the progress of this project ...

This week, the OVERLEAF consortium met in Spain at the AIMPLAS site for two days of discussions on the progress of the project. The OVERLEAF project, funded by the European ...

We were very happy to welcome the EMPHASIS project team for two days.   EMPHASIS, a European research project launched in February 2023 and funded by Horizon Europe, aims to set ...

On September 27th and 28th, the Greenvehicles LEVIS consortium met in Turkey. All the partners discussed in detail the progress of the project and the areas for future development.   ...

Last Wednesday and Thursday, the NEMMO European project consortium met at the SSPA premises in Denmark to bring 4 years of research and development to a close.   The aim ...

A new paper on additive manufacturing, the result of a collaboration between Institut Pprime and CANOE. The study, entitled "3D printing of continuous cellulose fibre composites: microstructural and mechanical characterisation", ...

The Management Board of CANOE elected Richard Audry as President on 28 July 2021. He succeeds Patrice Gaillard who had held this position since July 2020.   A chemist by ...

On February 2, 2021 the first phase of the LEVIS project, a three-year EU (Horizon 2020) funded innovation project, started with a kick-off meeting via video conference. The aim of ...

In collaboration with IRT Jules Verne and within the framework of the FORCE project, CANOE has just installed a wet spinning line which will make possible to control the formulation ...

CANOE is a Technological Centre dedicated to innovative materials, at the service of industrialists, which has continuously developed and increased its performance at both national and European level over the last ...

At the JEC AWARDS 2020, CANOE was rewarded with its partners of the DESTINY project for a major innovation in thermoplastic composites for the railway industry: a train cabin made ...

CANOE is very involved in the manufacturing of fibers, especially from bio-based materials such as cellulose or lignin. These fibers can be used as precursors for low cost carbon fibers, ...

Following the measures put in place to limit the spread of the COVID-19 epidemic, CANOE continues its activity under the following conditions: - All team members have been teleworking since ...

Our telephone number has changed, please dial +33 (0)5 35 38 97 27, thank you for your understanding.

The NEMMO project has installed a set of tidal turbine blade panels made from fibreglass and a gel-coat coating for testing at the HarshLab facility. The samples, taken from the current Magallanes’ ...

During the past years, recycling of thermoplastics has attracted the interest of the plastics industry. The recyclability is one of the advantages of these raw materials. On the other hand, ...

 

A common research project between CANOE and FCBA leads to the valorization of locally produced lignin as main component for additive manufacturing applications. Nowadays, PLA is one of the major ...

Successful start-up of the semi-industrial pilot line for low-cost carbon fibre at CANOE facilities in Lacq.

As part of the FORCE project, which aims to develop low cost carbon fibers with mechanical properties tailored for the automotive, and sports and leisure markets ; the regional council ...

On June 11, 2018, CANOE shared a friendly time initiated by the Regional Council of New-Aquitaine, with the nautical and naval sector on board of the Hermione frigate. On this ...

In the coming weeks, CANOE will participate to several international conferences to present its results on biobased precursors such as lignin or cellulose for carbon fibers :   1. ChemOnTubes – ...

At the end of March, two wind blades of 25meters each have arrived at CANOE technological center in LACQ. They have been manufactured in Elium® resin during the EFFIWIND project ...

The PhD students of the two ITNs DISTRUC and COLLDENSE participated at the Edinburgh International Science Festival from April 6-8, 2018. In collaboration between the two networks, the students organized ...

CANOE is proud to be part of EFFIWIND project which has been highlighted in ARKEMA video showing the 25m long, G2 wind blade manufacturing. EFFIWIND project, funded by ADEME, started ...

CANOE is very involved in the manufacturing of low cost carbon fibers from precursors such as cellulose, lignin or polyethylene. The objective is to develop economical carbon fibers for use ...

The French journal LesEchos has just published a focus article on our Technology Center, our collaborations and innovations.

CANOE is proud of the focus article on BALAKOVO Carbon Production LTD, our partner in CARBOPREC European project. In its issue 2 published  on June 26th 2017, the Russian magazine ...

On Wednesday, January 24th, CANOE received final year students of ENSCBP engineering school (Materials and Advanced Processes majors) for a one-day training class about composite materials. On this occasion, they ...

CANOE attended the kick-off meeting of the European project SMARTFAN held on 2018/01/16 in the European Commission premises in Brussels (BE). This research and innovation action (RIA) gathers 18 partners. ...

On December 14th and 15th, CANOE hosted the CARBOPREC consortium for the final meeting. After 4 years of R&D, it was the opportunity to show all the technologies developed during ...

The european project FIBRALSPEC (same call as CARBOPREC with CANOE as partner) organized on November 29th a workshop as final event. CANOE had the opportunity to present the last results ...

The AUTONOTEX project was launched two years ago and aims in particular at the development of three-component fibers combining electrical and piezoelectric conductive polymers. The piezoelectric polymer is a Polyvinylidene ...

  CANOE is proud to announce the official opening of its new facilities located in Lacq (France). This ceremony will occur tomorrow on November 9th 2017 and will be attended ...

This year, CANOE will attend once again the COMPOSITES MEETINGS event in Nantes (France) on November 8th and 9th 2017. We will be pleased to meet you in our booth ...

Lacq Green Valley: to support the energy transition in Nouvelle Aquitaine region CANOE new projects have been published in the INFO Chimie October 2017 special edition. This year (2017), CANOE ...

During the ISOCEL steering committee at T0 + 66 months, which took place in MONDRAGON ASSEMBLY facilities (located in Orange, France) on October 11th and 12th 2017, MONDRAGON unveiled the ...

On Tuesday, October 10th, a Czech junior engineer – Jan Klusak – received in CANOE premises in Pau (France) the first prize of the PRINTCR3DIT contest for his catalytic reactor ...

On Wednesday, October 18th 2017 from 9 a.m. to 5 p.m., CREPIM and CANOE will organize a new technical workshop: FIRE & MARINE FTP CODE 2010: WAYS AND MEANS TO ...

On Friday, September 29th 2017, CANOE was proud to be among the guests for the christening ceremony of the prototype Mini 6.50 ARKEMA 3. A couple of days before the ...

  The Nouvelle Aquitaine and Pau-Béarn CCI, CANOE, CETIM, and the Nouvelle Aquitaine board joined forces to give you a half day discovery workshop dedicated to the additive manufacturing various ...

aPSI3D, a start-up company located in Tarbes (France), was developing SiC power module, designed for the hybrid and electrical vehicle market. At the final stage of development, they faced a ...

Today, on Thursday 06.29.2017, Gazelle Tech and CANOE announced, during the ECO TECH'DAY workshop organized by Bordeaux Technowest, their partnership in developing the new prototype Gazelle V1. In light of ...

TAUPIN’UP project, led by M2i life sciences and in which CANOE is a partner, was honored again in ARCACHON (France) on last June 20th with the Agri Sud-Ouest Innovation High ...

On June 21st 2017, CANOE hosted in its Cheminnov facilities (Pessac, France) the 6th Elastomers Work Group Meeting in collaboration with “Aquitaine Chimie Durable” (Sustainable Chemistry in Aquitaine). The work ...

As part of their WIDE ANGLE section of their 938 issue of May 2017, “Plastique & Caoutchouc” (Plastic & Rubber) magazine wrote a focus section about “RECYCLING, an essential partner ...

A selection of our creations - some of them were the result of collaborative work with our partner D33D - were nicely highlighted on the Nouvelle Aquitaine region booth.

CANOE will attend the French-speaking Carbon Symposium, organized by SFEC, on May 21st-24th 2017 in «La Vieille Perrotine» (Saint Pierre d’Oléron, France). We will give an oral presentation about: The ...

Thanks to its Additive Manufacturing/3D Printing activites, CANOE has an expertise in formulating materials for various additive manufacturing techniques. In mid-2014, CANOE asked the start-up D33D (contact@d33d.fr) – which has ...

This year again, CANOE is attending the 2017 MICM (innovative materials and materials chemistry) conference on May 10th-11th in Bordeaux (France). You can find us during our oral presentations: From ...

Please don’t forget to register for the new PLASTIC & FIRE technical workshop entitled “plastic fire protection: new features and last developments”. We will organize this event in collaboration with ...

The FORCE II project (“realistic optimized fiber based on economical carbon”) The European regulations force the French automotive companies to find solutions to comply with the CO2 reduction down to ...

CANOE is attending today the AXIS workshop organized by ELASTOPÔLE in Schneider Electric facilities (France). We will give an oral presentation about Additive Manufacturing based on photopolymerizable resins.

CANOE and Aquitaine region board 2007-2017: 10 years of loyalty and collaboration for innovation in the field of composite materials!  

On next March 14th-16th, the JEC 2017 conference (“European Composites Workshop”), the biggest international gathering involving professionals in the field of composites, will take place in Paris (France). CANOE will ...

Towards a better repurposal of composite materials. On last February 2nd, CRECOF (“French committee of composites recycling”) organized a workshop in Technocampus Composites, next to Nantes (France), in order to ...

For several months now, CANOE and the AUTHENTIC MATERIAL company, located in Toulouse, have been collaborating to develop new bio-based composites materials. These materials are composed of natural resources which ...

Marie Föllmer, Ph.D. student in CANOE in DISTRUC project, won the “Best Outreach Activity 2016” prize awarded by COST Action MP1305 thanks to her major input in the outreach event ...

CANOE is presenting a new generation of acrylic, recyclable, photovoltaic panels developed in ISOCEL project.