CANOE at JEC World 2024 ...

JEC World is the world's No. 1 trade show dedicated to composite materials and their applications, welcoming the main players in the market to develop their business and network, as ...
14 février 2024

Setting course for 2024! ...

As we welcome a new year full of promise, we are grateful for the valuable collaboration we share with you.    May 2024 be a year of innovation, success and ...
2 janvier 2024

Happy Holidays ! ...

As the year draws to a close, we would like to express our gratitude for the fruitful collaboration we have shared. Your trust inspires us every day.    May this ...
22 décembre 2023

THERMOFIRE project in progress… ...

Last month, CANOE received the consortium of the European THERMOFIRE project at its premises in Lacq (France).   Excellent moment of exchanges and sharing on the progress of this project ...
15 décembre 2023

Back to the progress of the European OVERLEAF project ...

This week, the OVERLEAF consortium met in Spain at the AIMPLAS site for two days of discussions on the progress of the project. The OVERLEAF project, funded by the European ...
14 décembre 2023

Back on the first EMPHASIS project meeting ...

We were very happy to welcome the EMPHASIS project team for two days.   EMPHASIS, a European research project launched in February 2023 and funded by Horizon Europe, aims to set ...
20 octobre 2023

The Greenvehicles LEVIS consortium in Turkey ...

On September 27th and 28th, the Greenvehicles LEVIS consortium met in Turkey. All the partners discussed in detail the progress of the project and the areas for future development.   ...
3 octobre 2023

End of the NEMMO project: the Next Evolution in Materials and Models for... ...

Last Wednesday and Thursday, the NEMMO European project consortium met at the SSPA premises in Denmark to bring 4 years of research and development to a close.   The aim ...
22 septembre 2023

New article on additive manufacturing ...

A new paper on additive manufacturing, the result of a collaboration between Institut Pprime and CANOE. The study, entitled "3D printing of continuous cellulose fibre composites: microstructural and mechanical characterisation", ...
30 août 2023

[ANNOUNCEMENT] – RICHARD AUDRY, NEW PRESIDENT OF THE CANOE TECHNOLOGY CENTER ...

The Management Board of CANOE elected Richard Audry as President on 28 July 2021. He succeeds Patrice Gaillard who had held this position since July 2020.   A chemist by ...
29 septembre 2021

CANOE PARTNER OF THE EUROPEAN LEVIS PROJECT: project on the lightening of electric... ...

On February 2, 2021 the first phase of the LEVIS project, a three-year EU (Horizon 2020) funded innovation project, started with a kick-off meeting via video conference. The aim of ...
14 avril 2021

Installation and start-up of the wet spinning pilot line at our Lacq site ...

In collaboration with IRT Jules Verne and within the framework of the FORCE project, CANOE has just installed a wet spinning line which will make possible to control the formulation ...
9 octobre 2020

July 1, 2020: CANOE becomes autonomous ...

CANOE is a Technological Centre dedicated to innovative materials, at the service of industrialists, which has continuously developed and increased its performance at both national and European level over the last ...
21 juillet 2020

JEC Awards 2020: CANOE co-winner on a major project related to thermoplastic composites ...

At the JEC AWARDS 2020, CANOE was rewarded with its partners of the DESTINY project for a major innovation in thermoplastic composites for the railway industry: a train cabin made ...
4 juin 2020

REOPENING OF ALL OUR SITES SINCE 18 MAY 2020 ...

18 mai 2020

A WET-SPINNING LINE will be installed soon at CANOE Lacq ...

CANOE is very involved in the manufacturing of fibers, especially from bio-based materials such as cellulose or lignin. These fibers can be used as precursors for low cost carbon fibers, ...
15 mai 2020

COVID 19 – MEASURES ADOPTED BY CANOE ...

Following the measures put in place to limit the spread of the COVID-19 epidemic, CANOE continues its activity under the following conditions: - All team members have been teleworking since ...
17 mars 2020

CANOE – NEW PHONE NUMBER – +33 (0)5 35 38 97 27 ...

Our telephone number has changed, please dial +33 (0)5 35 38 97 27, thank you for your understanding.
12 mars 2020

CANOE partner of the NEMMO project is proud to announce the launch of... ...

The NEMMO project has installed a set of tidal turbine blade panels made from fibreglass and a gel-coat coating for testing at the HarshLab facility. The samples, taken from the current Magallanes’ ...
24 février 2020

RECYCLING Elium® GLASS FIBERS IN PMMA THERMOPLASTICS ...

During the past years, recycling of thermoplastics has attracted the interest of the plastics industry. The recyclability is one of the advantages of these raw materials. On the other hand, ...
24 janvier 2020

CANOE WISHES YOU ALL THE BEST FOR 2020 ...

9 janvier 2020

Additive Manufacturing – CANOE & FCBA: From Plant Production (Wood in Particular) to... ...

A common research project between CANOE and FCBA leads to the valorization of locally produced lignin as main component for additive manufacturing applications. Nowadays, PLA is one of the major ...
4 septembre 2019

JEC COMPOSITES MAGAZINE #1 – NEW ARTICLE ON THE PILOT LINE FOR LOW-COST... ...

Successful start-up of the semi-industrial pilot line for low-cost carbon fibre at CANOE facilities in Lacq.
27 mars 2019

JEC 2019 : COME TO MEET OUR EXPERTS ...

20 février 2019

CANOE wishes you a Happy New Year 2019 ! ...

15 janvier 2019

CANOE ANNOUNCES THE OPERATION OF CARBONIZATION PILOT ON ITS LACQ SITE / FORCE... ...

As part of the FORCE project, which aims to develop low cost carbon fibers with mechanical properties tailored for the automotive, and sports and leisure markets ; the regional council ...
25 septembre 2018

CANOE is involved in the future Nautical and Naval Cluster New-Aquitaine ...

On June 11, 2018, CANOE shared a friendly time initiated by the Regional Council of New-Aquitaine, with the nautical and naval sector on board of the Hermione frigate. On this ...
25 juin 2018

CANOE: NEXT ORALS ON CARBON FIBERS ...

In the coming weeks, CANOE will participate to several international conferences to present its results on biobased precursors such as lignin or cellulose for carbon fibers :   1. ChemOnTubes – ...
23 avril 2018

CANOE and GRL- ARKEMA has received two ELIUM® wind blades ...

At the end of March, two wind blades of 25meters each have arrived at CANOE technological center in LACQ. They have been manufactured in Elium® resin during the EFFIWIND project ...
18 avril 2018

OUTREACH WORKSHOP ORGANIZED by DISTRUC PhD students in EDINBURGH ...

The PhD students of the two ITNs DISTRUC and COLLDENSE participated at the Edinburgh International Science Festival from April 6-8, 2018. In collaboration between the two networks, the students organized ...
13 avril 2018

EFFIWIND project: First 25m long wind blade manufactured using ELIUM resin ...

CANOE is proud to be part of EFFIWIND project which has been highlighted in ARKEMA video showing the 25m long, G2 wind blade manufacturing. EFFIWIND project, funded by ADEME, started ...
27 mars 2018

JEC 2018 : COME TO MEET OUR EXPERTS ...

23 février 2018

a CARBONIZATION LINE will be installed soon at CANOE Lacq ...

CANOE is very involved in the manufacturing of low cost carbon fibers from precursors such as cellulose, lignin or polyethylene. The objective is to develop economical carbon fibers for use ...
20 février 2018

CANOE, the COMPOSITE “PROJECT FACTORY” ...

The French journal LesEchos has just published a focus article on our Technology Center, our collaborations and innovations.
16 février 2018

FOCUS ON BALAKOVO Carbon Production LTD – OUR PARTNER IN CARBOPREC Project ...

CANOE is proud of the focus article on BALAKOVO Carbon Production LTD, our partner in CARBOPREC European project. In its issue 2 published  on June 26th 2017, the Russian magazine ...

CANOE BERSOL: TRAINING CLASS ABOUT COMPOSITES MANUFACTURING PROCESSES FOR ENSCBP ENGINEERING SCHOOL STUDENTS... ...

On Wednesday, January 24th, CANOE received final year students of ENSCBP engineering school (Materials and Advanced Processes majors) for a one-day training class about composite materials. On this occasion, they ...
1 février 2018

CANOE attended the kick-off meeting of SMARTFAN project – 01/16/2018 ...

CANOE attended the kick-off meeting of the European project SMARTFAN held on 2018/01/16 in the European Commission premises in Brussels (BE). This research and innovation action (RIA) gathers 18 partners. ...
24 janvier 2018

CANOE WISHES YOU A HAPPY NEW YEAR 2018 ...

2 janvier 2018

CARBOPREC final meeting hosted by CANOE – December 14th-15th 2017 ...

On December 14th and 15th, CANOE hosted the CARBOPREC consortium for the final meeting. After 4 years of R&D, it was the opportunity to show all the technologies developed during ...
19 décembre 2017

FIBRALSPEC – CARBOPREC – 11.29.2017 ...

The european project FIBRALSPEC (same call as CARBOPREC with CANOE as partner) organized on November 29th a workshop as final event. CANOE had the opportunity to present the last results ...

CANOE hosted the Steering Committee of AUTONOTEX Project ...

The AUTONOTEX project was launched two years ago and aims in particular at the development of three-component fibers combining electrical and piezoelectric conductive polymers. The piezoelectric polymer is a Polyvinylidene ...
17 novembre 2017

CANOE – 11-09-2017 – OFFICIAL OPENING OF OUR NEW FACILITIES LOCATED IN LACQ... ...

  CANOE is proud to announce the official opening of its new facilities located in Lacq (France). This ceremony will occur tomorrow on November 9th 2017 and will be attended ...
9 novembre 2017

CANOE – COMPOSITES MEETINGS / NANTES (FRANCE) – 2017 – BOOTH #112 ...

This year, CANOE will attend once again the COMPOSITES MEETINGS event in Nantes (France) on November 8th and 9th 2017. We will be pleased to meet you in our booth ...
8 novembre 2017

CANOE: LACQ GREEN VALLEY – WITHOUT CHEMISTRY, NO ENERGY TRANSITION! ...

Lacq Green Valley: to support the energy transition in Nouvelle Aquitaine region CANOE new projects have been published in the INFO Chimie October 2017 special edition. This year (2017), CANOE ...
31 octobre 2017

Steering Committee Meeting of ISOCEL project – October 11th and 12th 2017 in... ...

During the ISOCEL steering committee at T0 + 66 months, which took place in MONDRAGON ASSEMBLY facilities (located in Orange, France) on October 11th and 12th 2017, MONDRAGON unveiled the ...
13 octobre 2017

3D printing: CANOE held the award ceremony of the PRINTCR3DIT European contest ...

On Tuesday, October 10th, a Czech junior engineer – Jan Klusak – received in CANOE premises in Pau (France) the first prize of the PRINTCR3DIT contest for his catalytic reactor ...
11 octobre 2017

10-18-2017 – FIRE & MARINE TECH WORKSHOP – CREPIM & CANOE ...

On Wednesday, October 18th 2017 from 9 a.m. to 5 p.m., CREPIM and CANOE will organize a new technical workshop: FIRE & MARINE FTP CODE 2010: WAYS AND MEANS TO ...
5 octobre 2017

CANOE ATTENDED THE CHRISTENING CEREMONY OF ARKEMA 3 ...

On Friday, September 29th 2017, CANOE was proud to be among the guests for the christening ceremony of the prototype Mini 6.50 ARKEMA 3. A couple of days before the ...
2 octobre 2017

CANOE PAU – 09-28-2017 – ADDITIVE MANUFACTURING WORKSHOP ...

  The Nouvelle Aquitaine and Pau-Béarn CCI, CANOE, CETIM, and the Nouvelle Aquitaine board joined forces to give you a half day discovery workshop dedicated to the additive manufacturing various ...
18 septembre 2017

CANOE / aPSI3D: a successful collaboration thanks to inkjet 3D printing! ...

aPSI3D, a start-up company located in Tarbes (France), was developing SiC power module, designed for the hybrid and electrical vehicle market. At the final stage of development, they faced a ...
15 septembre 2017

PROTOTYPE GAZELLE V1: CANOE and GAZELLE TECH partners again ...

Today, on Thursday 06.29.2017, Gazelle Tech and CANOE announced, during the ECO TECH'DAY workshop organized by Bordeaux Technowest, their partnership in developing the new prototype Gazelle V1. In light of ...
29 juin 2017

TAUPIN’UP PROJECT WINNER OF THE AGRI SUD-OUEST HIGH SCHOOL STUDENTS AWARD ...

TAUPIN’UP project, led by M2i life sciences and in which CANOE is a partner, was honored again in ARCACHON (France) on last June 20th with the Agri Sud-Ouest Innovation High ...
27 juin 2017

6th Elastomers Work Group Meeting organized in CANOE ...

On June 21st 2017, CANOE hosted in its Cheminnov facilities (Pessac, France) the 6th Elastomers Work Group Meeting in collaboration with “Aquitaine Chimie Durable” (Sustainable Chemistry in Aquitaine). The work ...
21 juin 2017

COMPOSITES: AN EMERGING SECTOR ...

As part of their WIDE ANGLE section of their 938 issue of May 2017, “Plastique & Caoutchouc” (Plastic & Rubber) magazine wrote a focus section about “RECYCLING, an essential partner ...
20 juin 2017

CANOE HIGHLIGHTED ON THE REGION BOOTH – BORDEAUX INTERNATIONAL FAIR (FRANCE) – 2017 ...

A selection of our creations - some of them were the result of collaborative work with our partner D33D - were nicely highlighted on the Nouvelle Aquitaine region booth.
30 mai 2017

CANOE will attend the French-speaking Carbon Symposium – SFEC – On May 21st-24th... ...

CANOE will attend the French-speaking Carbon Symposium, organized by SFEC, on May 21st-24th 2017 in «La Vieille Perrotine» (Saint Pierre d’Oléron, France). We will give an oral presentation about: The ...
12 mai 2017

CANOE/D33D PARTNERSHIP: optimizing the material/process pair ...

Thanks to its Additive Manufacturing/3D Printing activites, CANOE has an expertise in formulating materials for various additive manufacturing techniques. In mid-2014, CANOE asked the start-up D33D (contact@d33d.fr) – which has ...

CANOE at MICM 2017 – 4th edition / Bordeaux (France) – May 10th-11th... ...

This year again, CANOE is attending the 2017 MICM (innovative materials and materials chemistry) conference on May 10th-11th in Bordeaux (France). You can find us during our oral presentations: From ...
10 mai 2017

CANOE & CREPIM – 04.20.2017 – PLASTIC & FIRE TECHNICAL WORKSHOP – PAU... ...

Please don’t forget to register for the new PLASTIC & FIRE technical workshop entitled “plastic fire protection: new features and last developments”. We will organize this event in collaboration with ...
6 avril 2017

FORCE PROJECT: develop an economical carbon fiber sector – CANOE partner of this... ...

The FORCE II project (“realistic optimized fiber based on economical carbon”) The European regulations force the French automotive companies to find solutions to comply with the CO2 reduction down to ...
28 mars 2017

CANOE participant in the AXIS workshop – Industry of the Future – 03-22-2017... ...

CANOE is attending today the AXIS workshop organized by ELASTOPÔLE in Schneider Electric facilities (France). We will give an oral presentation about Additive Manufacturing based on photopolymerizable resins.
22 mars 2017

CANOE – AQUITAINE REGION BOARD / 2007-2017 / 10 YEARS OF LOYALTY AND... ...

CANOE and Aquitaine region board 2007-2017: 10 years of loyalty and collaboration for innovation in the field of composite materials!  
15 mars 2017

CANOE attending JEC World 2017 – Paris (France) on March 14th-16th 2017 ...

On next March 14th-16th, the JEC 2017 conference (“European Composites Workshop”), the biggest international gathering involving professionals in the field of composites, will take place in Paris (France). CANOE will ...
23 février 2017

CANOE presented the REVERPLAST project in CRECOF Workshop – ACHIEVE SUCCESSFUL RECYCLING OF... ...

Towards a better repurposal of composite materials. On last February 2nd, CRECOF (“French committee of composites recycling”) organized a workshop in Technocampus Composites, next to Nantes (France), in order to ...
9 février 2017

CANOE and AUTHENTIC MATERIAL are joining forces to develop bio-based composite materials ...

For several months now, CANOE and the AUTHENTIC MATERIAL company, located in Toulouse, have been collaborating to develop new bio-based composites materials. These materials are composed of natural resources which ...
3 février 2017

CANOE – DISTRUC PROJECT: OUR PH.D. STUDENT HONOURED WITH “BEST OUTREACH ACTIVITY 2016”... ...

Marie Föllmer, Ph.D. student in CANOE in DISTRUC project, won the “Best Outreach Activity 2016” prize awarded by COST Action MP1305 thanks to her major input in the outreach event ...
27 janvier 2017

CANOE in direct live from « Assises Européenne de la Transition Energétique »... ...

CANOE is presenting a new generation of acrylic, recyclable, photovoltaic panels developed in ISOCEL project.
24 janvier 2017

CANOE WISHES YOU A HAPPY NEW YEAR 2017 ...

19 janvier 2017

Foundation stone laying of CANOE new facilities ...

On Thursday, December 1st 2016 was held the Foundation stone laying ceremony of the extension of Chemstart’up building. This extension will be CANOE new facilities. This 1092 m² building, dedicated ...
5 décembre 2016

CANOE: M2i, a TAUPIN’UP project partner, winner of the EBAE award ...

CANOE is proud to collaborate with M2i Life Sciences which has just been awarded by Europe board for its work and its innovative products in the field of pheromones and ...
16 novembre 2016

Effiwind: a new generation of wind blades ...

In issue 108 (October 2016) dedicated to wind energy, JEC COMPOSITES MAGAZINE wrote a focus article about EFFIWIND project. The goal of this project is to develop a new generation ...
3 novembre 2016

CANOE facilities in Pau (France) honoured with an architecture award ...

CANOE building, located in UPPA university campus, has been honoured during the 14th ARCHITECTURE ALUMINIUM TECHNAL awards. « Espagno Milani Architectes Associés » office has won the “Etudier” (= study) award for ...
26 octobre 2016

CANOE attended the signing ceremony of the agreement between Nouvelle Aquitaine region board... ...

On October 11th 2016 in Hotel de Region building, CANOE attended the signing ceremony of the partnership agreement between Nouvelle Aquitaine region board and CEA/DAM about development of technologies and ...
11 octobre 2016

CANOE will attend the “Companies Hub” event ...

CANOE will attend the “Companies Hub” event organized by ENSCBP College School on September 21st, 22nd and 23rd. This event goal is to promote interaction between companies and innovation centers ...
19 septembre 2016

Effiwind – a new generation of wind blades ...

The goal of EFFIWIND project is to develop a new generation of wind blades based on thermoplastic, acrylic, and recyclable polymeric materials. This project, supported by ADEME and Nouvelle Aquitaine ...
19 juillet 2016

CANOE is attending Seanergy on June 1st and 2nd 2016 ...

CANOE is attending the SEANERGY international workshop (sustainable ocean energies) in Aquitaine-Limousin-Poitou-Charentes region facilities on June 1st and 2nd to highlight its skills in the field of composites and advanced ...
2 juin 2016

CANOE is attending MICM ...

CANOE is attending the 3rd edition of Chemistry and Materials workshop (MICM) on May 18th and 19th 2016 in Cité Mondiale in Bordeaux (France). The event consists in scheduled business ...
18 mai 2016

CANOE partner in REVERPLAST project ...

On April 27th 2016, the first French chemist Arkema signed with Ségolène ROYAL (French Secretary of State for environment, energy and sea), Emmanuel MACRON (French Secretary of State for economy, ...
17 mai 2016

CANOE signs up for Autonotex project about connected textiles ...

The goal of AUTONOTEX project is to standardize and launch the first autonomous connected textile, designed for medical sheets – that could monitor patient health – and professional underwear for ...
12 avril 2016

First newsletter of the european project DiStruc ...

The European project DiStruc (“Directed Structure at the meso-scale”) is a Marie Curie Innovative Training Network providing integrated training for 15 young researchers in the field of soft condensed matter. ...
6 avril 2016

CANOE attended Techno Day event in Pau (France) ...

During the Techno Day workshop, organized by Aerospace Valley, innovative products have been presented by specialized companies. The second edition of this workshop which took place on March 31st 2016 ...
4 avril 2016

CANOE attended the 6th Printed Electronics Meetings (France) ...

With a 2 milliards USD market in 2015 (estimated by IDTECHEX), printed electronics is exponentially growing. Electronic connections between components can be printed as well as passive or active components ...
30 mars 2016

CANOE: a new facility in mind? ...

In Chemstart’up facilities (Lacq-Orthez, France), CANOE, Chemstart’up teams, CCLO and Aquitaine region board are thinking about creating a new demonstration platform for technologies related to energy transition. Exhibited technologies are ...
24 mars 2016

2nd meeting for partners of European project PRINTCR3DIT in Oslo ...

As part of H2020 project PRINTCR3DIT about custom manufacturing of catalytic reactors using 3D printing, CANOE has been warmly welcomed by its Norwegian partner SINTEF for the 6-months progress meeting. ...
21 mars 2016

FORCE project: launching of stage II ...

FORCE PROJECT: REALISTIC OPTIMIZED FIBER and ECONOMIC CARBON To develop an economic carbon sector in France, companies, technical centers and laboratories are joining forces in a R&D program which will ...
15 mars 2016

CANOE visited and met Airbus in their facilities in Madrid (Spain) ...

On February 17th-18th 2016 in FIDAMC facilities of Airbus Madrid, CANOE attended the T0 + 12M steering committee of H2020 European project FORTAPE. Beside their strong involvement during technical meetings, ...
11 mars 2016

CANOE back in Lacq (France) thanks to CCLO ...

CANOE will be back in Lacq (France) in autumn 2016 thanks to its partnership with CCLO. Indeed, CCLO is launching a new real estate project which will allow to support ...
26 février 2016

CANOE wishes you a happy new year 2016 ...

11 janvier 2016